How should distributed PV respond to typhoon attacks?

- Sep 08, 2018 -

For distributed photovoltaics, before the typhoon comes, it is necessary to carefully check the quality of the buildings supported by the photovoltaic projects and check the strength of pv solar panel mounting structure components such as photovoltaic modules and photovoltaic solar panel supports. In addition, insurance can be purchased as appropriate.

How has it been reinforced?

1. Carry out a comprehensive inspection of the installed PV modules and projects under construction, including the adjustment of the fasteners and fasteners of the screws, and replace the damaged fasteners immediately. If necessary, the tandem assembly on the windward side can be bundled and fixed with a double strand of 2 mm square wire.

2. The windshield can be fastened to the photovoltaic solar panel bracket support to prevent the bracket from twisting with the wind; the ground anchors that have been drilled through the rock on both sides are tamped; the bolts of the whole field are tightened;

3. Strengthen the inspection of components and solar panel mounting brackets. Once loose components and solar panel brackets are found, they should be fixed in time.

4. If the load of the color steel tile roof does not meet the bearing requirements, it must be strengthened according to the correct plan.

Related Industry Knowledge

Related Products

  • Solar Mounting Clips
  • Solar Panel Supports
  • Stainless Steel Solar Cable Clips
  • End Clamps for Solar
  • Quick Rack PV
  • Solar Mounting Systems