Color steel tile roof photovoltaic installation system, inclined tile roof photovoltaic installation system, cement flat roof photovoltaic installation system, ground all-aluminum alloy solar mounting bracket system, adjustable solar mounting bracket installation system; aluminum briquette (crystalline silicon briquette, film briquette), color Steel tile fixtures (angle chi fixtures, vertical seaming fixtures, trapezoidal fixtures, etc.), aluminum alloy guide rails, stainless steel hooks and screw accessories, etc.
1. Factory steel solarmounting structure in line with the construction of rooftop power stations
The requirements of photovoltaic power plants should be considered in the design and construction of the plant. If it is installed on a built roof, the design institute needs to calculate whether the bearing capacity meets the installation conditions of the photovoltaic power station.
The internal structure of the color steel tile roof factory building.
The color steel tile roof factory building must meet the requirements of photovoltaic design and the load-bearing capacity required for photovoltaic installation.
2. On-site trial installation of fixtures or measurement of color steel tile size
When designing or producing the color steel tile bracket scheme, it is necessary to carry out measurement and trial installation on site.
The cross-section size of the T-shaped color steel tile is measured in order to make the fixture sample for trial installation.
Fixture samples are generally processed by wire cutting in the early stage when there is no suitable sample, and then they are tested on the project site to confirm the compatibility of the fixture and the color steel tile.
